Lu2O3对球形Ni(OH)2高温充放电性能的影响

为了改善镍电极的高温充电效率，采用机械混合的方式将球形Ni(OH)2与不同比例的Lu2O3混合后制成粘结式镍正极。充放电测试、循环伏安和XRD等实验结果表明，掺杂Lu2O3后镍电极的析氧过电位明显提高，高温充电效率得到了很大改善，在充电后的电极中β-NiOOH生成；而且Lu2O3的掺杂比例对镍电极的高温性能在不同的充放电倍率下有不同程度的影响，3．5％是最好的掺杂比例，掺杂对高温小电流充电效率的改善作用要大于高温大电流充电。     

Ultrafast collective dynamics in the charge-density-wave conductor K(0.3)MoO(3)

Low-energy coherent charge-density wave excitations are investigated in blue bronze (K(0.3)MoO(3)) and red bronze (K(0.33)MoO(3)) by femtosecond pump-probe spectroscopy. A linear gapless, acousticlike dispersion relation is observed for the transverse phasons with a pronounced anisotropy in K(0.33)MoO(3). The amplitude mode exhibits a weak (opticlike) dispersion relation with a frequency of 1.67 THz at 30 K. Our results show for the first time that the time-resolved optical technique provides momentum resolution of collective excitations in strongly correlated electron systems.     

N-取代乙醇胺对4-氟-1-酰基苯的选择性胺化反应

研究了4-氟-1-酰基苯和N-取代乙醇胺在酰胺类溶剂或不加溶剂中反应, 在不需要金属催化剂和另外加碱的条件下选择性地得到胺化产物, 实验操作简单, 符合S_NAr取代机理. 一系列羟乙基胺基酰基苯产物均经过元素分析(HRMS), IR, MS和NMR的测定.     

Preparation and mechanical properties of thermal energy storage microcapsules

A series of heat energy storage microcapsules was prepared using melamine-formaldehyde resin as the shell material and the mechanical properties of the shell were investigated. A phase change material whose melting point was 24 °C was used as core and the quantity of heat involved in phase transition was 225.5 J/g. Average diameter of the microcapsules varied from 5 to 10 μm, and the globular surface was smooth and compact. The mechanical properties of the shell were evaluated by observing the surface morphological structure change after application of pressure by means of scanning electron microscopy. When the mass ratio of the core and shell material is 3:1, a yield point of about 1.1×10⁵ Pa was found and when the compression was increased beyond this point the microcapsules showed plastic behavior. This has been attributed to the cross-link density and to the high degree of reaction of the shell material. Different yield points subsequently reflected differences in the mechanical behavior. It was also found that the mechanical intensity of double-shell microcapsules was better than that of single shelled ones.     

Consistent treatment of inter- and intramolecular polarization in molecular mechanics calculations

A protocol is described for the treatment of molecular polarization in force field calculations. The resulting model is consistent in that both inter- and intramolecular polarization are handled within a single scheme. An analytical formula for removing intramolecular polarization from a set of atomic multipoles for an arbitrary static structure or conformation is given. With the help of the intramolecular polarization, these permanent atomic multipoles can then be applied in modeling alternative conformations of a molecule. Equipped with this simple technique, one can derive transferable electrostatic parameters for peptides and proteins using flexible model compounds such as dipeptides. The proposed procedure is tested for its ability to describe the electrostatic potential around various configurations of the N-methylacetamide dimer. The effect of different intramolecular polarization schemes on the accuracy of a force field model of the electrostatic potential of alanine dipeptide is investigated. A group-based scheme for including direct intramolecular polarization is shown to be most successful in accounting for the conformational dependence of electrostatic potentials.     

116例冠心病患者血清中钙镁钡铝锶含量的研究

测定１１６例冠心病患者血清中钙，镁，钡，铝和锶的含量并与正常值比较，常量元素钙，镁和微量元素锶降低，而微量元素钡和铝升高，它们之间的差异都有显著或高度显著性。Ｐ〈０．０５或Ｐ〈０．０１。     

铝交联皂石的合成和表征及催化性能

用XRD、化学分析、IR、MASNMR、TPD等手段表征了合成皂石及其铝交联物的结构。结果表明:皂石的交联密度与四面体层电荷和交联条件(Al/土比)有关。在乙醇氨化反应中,交联皂石显示了较好的催化活性和选择性。皂石的交联密度与液相产物分布的关系表明层柱材料对此反应具有择形催化作用。醇氨化反应可能是在吸附态NH_3和气相醇分子间进行的。     

Theoretical study on electronic structure and optical properties of phenothiazine-containing conjugated oligomers and polymers

The application of polyfluorenes in polymeric light-emitting diodes has been hampered because of the charge injection difficulties and the troublesome formation of a tailed emission band at long wavelengths (>500 nm) during device fabrication and operation, leading to both a color instability and reduced efficiency. The incorporation of the phenothiazine units has been proven to significantly enhance the hole injection and charge carrier balance and at the same time efficiently suppress the keto defect emission. In this contribution, we apply quantum-chemical techniques to investigate poly[10-(N-(2'-methyl)phenothiazine-3,7-diyl) and its fluorene copolymer poly[10-(N-(2'-methyl)phenothiazine-3,7-diyl)-co-alt-2,7-(9,9-dimethylfluorene)] (PFPTZ) and gain a detailed understanding the influence of phenothiazine units on the electronic and optical properties of fluorene derivatives. Density functional theory (DFT) and time-dependent DFT approaches are employed to study the neutral molecules, HOMO-LUMO gaps (Delta(H-L)), the lowest excitation energies (E(g)'s), positive and negative ions, as well as the IPs and EAs, focusing on the superiority of the electronic and optical properties attributed to the introduction of electron-donating moiety phenothiazine (PTZ) through comparing with pristine polyfluorene. The outcomes show that the highly nonplanar conformation of phenothiazine ring in the ground state preclude sufficiently close intermolecular interactions essential to forming aggregates or excimers. Furthermore, the HOMO energies lift about 0.4 eV, and thus, the IPs decrease about 0.3 eV in PFPTZ, suggesting the significant improved hole-accepting and transporting abilities, due to the electron-donating properties of phenothiazine ring by the presence of electron-rich sulfur and nitrogen heteroatoms and highly nonplanar characters, resulting in the enhanced performances in both efficiency and brightness compared with pristine polyfluorene. In addition, even though the introduction of electron-donating moiety PTZ onto fluorene leads to a slight bathochromic shift in absorption and emission spectra, the copolymer still exhibited strong blue emission.     

Analysing fluorobenzoate tracers in groundwater samples using liquid chromatography-tandem mass spectrometry. A tool for leaching studies and hydrology

A sensitive LC-MS-MS method for the direct determination and quantification of 15 fluorobenzoic acids (FBAs) was developed. FBAs are used as conservative tracers for hydrological modelling of water flow and in studies of pesticides and other xenobiotic compounds. The use of FBAs is discussed in relation to other tracers (bromide, chloride, uranine). The method covers mono-substituted fluorobenzoic acid, difluorobenzoic acid, trifluorobenzoic acid, and tetrafluorobenzoic acid. The general detection limit in ground water was 1 microg/l using electrospray ionisation and 20 microg/l using atmospheric pressure chemical ionisation. Analysis time was less than 10 min, small sample volumes were needed and no clean-up was required.     

Cure reaction and phase behavior of liquid crystalline epoxides-anhydride systems

A series of novel liquid crystalline epoxides with lateral substituents were cured with anhydrides and the cure kinetics was investigated by non-isothermal DSC technique. The results showed that the lengths of lateral substituents have great effect on the value of Ea. The curing reaction became less active, when the liquid crystalline epoxides have long lateral substituents and were controlled by diffusion at the late stage of cure. A nematic structure was observed by POM and XRD.